Emma Delacruz Harbor Freight September 27th, 2019 - 04:36:50
If an air compressor is out of the question, then may I suggest a 20-gallon shop-vac. Oh, don't look at me like that. I am so serious. Men might not know why, but they really need one. You can tell when you take them into that aisle at Home Depot. They stop and look longingly at it with a half smile. It may not get used weekly, but then you just might be surprised. A shop-vac may give him a reason to clean out the vehicles.
If you have ever seen a spray paint artist performing or on YouTube and wanted to try it, you can start out with an air-brush and water based acrylics instead. Spray paint cans can get very expensive and you will need much more protection and care to use them as they contain solvents. Start out with water based acrylics and an air-brush so you can learn to do spray paint art the safe and easy way.
I finally decided on these metal shelves from Target. The brand is Room Essentials and they come in different widths and numbers of shelves and are also available in black. I purchased the wide three self system in chrome. I also added the industrial 4 inch casters. The shelves require no tools to assemble and the casters screw directly in to the bottom of the legs. Each shelf is rated to hold more than 300 pounds. I also bought a roll of shelf lining for the bottom two shelves. The shelves are modular so I can add additional units later if I want. Target has all of this together in one location in the store so it was a one stop shopping kind of thing. The total cost for the shelves and liner was right at $60.
Now then, the other day I was paging through a tool catalog for Harbor Freight and Salvage and there were a number of generator and pressure washers available. Some of which were from China, and I have nothing against quality equipment from whatever country it comes from, but there is a big difference in quality, and a big difference in cost. Further there is a large gap between the number of decimals some of this equipment puts out, and it does matter, especially if you are detailing cars in a parking lot nearby offices.
There seems to be a lot of confusion about whether or not to soak the hardwood before burning it. First, do not bother with chips because they are a waste of time and money. You can readily obtain hardwood chunks from Walmart, Lowes, or Home Depot. There is simply no benefit to be derived from soaking your hardwood chunks. Chris Allingham has a video on just how much water penetration is achieved in an overnight soaking. View it at http://www.youtube.com/watch?v=rv7y1TWyKEw. Additionally, that wet wood is going to have to dry before it will burn. The drying process is going to create steam and that steam can contain creosote. Once the drying wood starts to burn, it is going to produce that thick, white smoke which will carry creosote. Remember, you want clear, blue smoke.
Router: 1 1/2 to 2 HP find a good used one, unless it's been dropped and kicked around a lot a good router lasts a long time, two things to look for first brushes that can still be bought and easily changed and two both a 1/4 and 1/2 inch Collete. a router that uses only a 1/4 Collete is of very limited use. if you can a new router of good quality can be bought for $100.00 and you really don't need a plunge router ( but they are nice ).