Gladys Figueroa Harbor Freight September 27th, 2019 - 04:16:33
Unfortunately for older glued floating hardwood floors, the multifunction tool does not provide all the accessories to complete a repair. These floors require a groove cleanout so they can effectively fit together again. Otherwise re-attachment is not possible without the final outcome looking like a repair. They simply will not engage and you're left with a repair board that will not fit back into place. Attempting to clean the glue with hand tools may work, but will take longer and is likely to cause damage to the surface of the board itself.
As if tipping over your motorcycle in a parking lot didn't make you feel stupid enough, learning the plastics damaged in the 0 mph crash will cost hundreds of dollars to replace will reaffirm your belief in an unjust world. While repairing the ABS plastic found on motorcycle fairings is straightforward, the plastic tends to break at the weakest point and if the point was weak when it was new, the fixed plastic will be a patch. Start by removing any stickers that cover the damaged plastic. A blow dryer will help loosen the glue.
The first thing is plenty of screwdrivers in various sizes. Nearly every computer and other electronic items have different kinds of screws that you will have to remove. I visited my local Wal-Mart and found an 18 piece screwdriver set on sale for $5.00. It works very well. I should have picked up several of them but I then went to my local Harbor Freight store and found another similar set for $5.00. It is good to have several on hand.
As far as materials you have a good choice. There is always the old standby: balsa wood. Balsa is light and easy to cut. A better choice might be plastics, in which case I would recommend using plastic from Evergreen Scale Models. That company produces a wide variety of shapes (sheet plastic, I beams, corrugated, etc.). Plastic also produces plastic in many construction type shapes.
Another large plus of grommet is that while you are happily making holes for nails and hooks you might not realize that you are also putting in holes made perfect for bungee cords, the grommets intended purpose. Now you can suspend your cardboard walls overhead and make them ceilings. Shifting walls and ceilings are easily made by stretching out a sheet of cardboard so it is suspended mid air. Using a PVC or 2 x 2 lightweight frame to stretch and anchor the bungee's to. Moving the frame can easily be accomplished with air rams or motors. Even easier is to suspend the sheet on a frame and have it anchored so you can manipulate the cardboard itself. Probably somewhat safer as well.
Second, "Time", I try to give myself all the time I need so as not to be rushed. This is extremely important. If you don't have enough time you will surely loose your focus, break a smooth routine and end with a bike half done. No doubt with an attitude that you wasted a great deal of time and you know your right you should have just jumped on that puppy and took off. Give yourself all the time you need and your whole world will turn easier. And when you do clean it your "good attitude" will go the distance. When you're done all that work will leave you with a sense that it wasn't so hard to do and doing it again won't be so bad. And don't forget to take breaks frequently, drink a little work a little, drink a little work a little you'll be amazed how quickly you get finished and how much better you'll feel.