Juana Golden Harbor Freight January 04th, 2020 - 01:14:45
Most hardware stores, back in the paint section, have what they call an "oops" area. An oops area is where all the custom coloring is done.......sometimes twice. The quart, gallon, and five gallon containers from the employees first attempts at the customers colors are usually reduced price steals. Where else are you going to find five gallons of black 30 year exterior latex enamel for $15.00? Concrete paints, porch and deck polymers, and the always abundant latex varieties are all victims to colorant errors. This is something I do faithfully every time I enter my Home Depot or Orchard Supply Hardware stores. Always seems to be a gallon black or a shade of gray in there all year long. Beware of the paint Nazi who thinks she can tell you how to paint and with what. PVA primer CAN be pigmented.
The next test involves cranking the car, and being safety aware (no hanging jewelry or long hair) and measuring voltage at the battery terminals. Read the voltage on the meter as someone else cranks the vehicle. The voltage should not drop below nine or ten volts. You may want to repeat this test to get an accurate reading. If the voltage is not within spec you should consider a new battery, or have your starter professionally tested.
We rely on our vehicle to take us to school, work, and leisure activities. We expect our automobile to start quickly, get us to our destination, and start-up on the way back. Whether it is the coldest day of winter or the hottest day of summer, we take our vehicle for granted and expect the gratifying sound of a rapid crank followed by a smooth running engine.
First off, lets cover some of my frugal basics of paint and painting supplies. Never throw away rollers unless you absolutely have to! Remember that most Halloween paints are black and grays, so washing out the color is near impossible. If enough paint is washed out the roller it becomes soft and fluffy and totally re-useable. It will still be black or gray but rinsing out enough paint to save some money isn't that much work.
Oh it must be more than a couple decades now, but I can remember dealing with an independent contractor in my auto detailing business in Santa Barbara. He told me that he bought a very quiet generator, a Honda model, top of the line. He told me that he wanted one powerful enough to run a 5-hp vacuum, his buffers, lights, and a 1500 psi, 2.5 gallon per minute pressure washer all at the same time. I asked him why.
Be sure to lubricate all moving surfaces with oil, WD-40™ or a dry film lubricant (You can use a light grease on the two lead screws, but if you grease the sliding rail, I think you'll find that the grease will probably be a sawdust magnet!). Be sure to lubricate all sliding or rotating joints and connectors, especially those added washers on the legs where they mount to the sideplates.