Juana Golden Harbor Freight January 04th, 2020 - 01:14:57
Orchard Supply to the rescue once again. The concrete molds have been in stock there forever. So get a walkway mold and align it with on one side or the other of your painted sheet. It's easiest to use a colored pencil similar in color to the color of your base coat. This makes it not so noticeable and you don't always stay within the lines so much, right kids? I tried using a Sharpie on one sheet and I hated myself for all the dark, heavy black lines left to cover. Using the mold upside down, trace the contour of the stones out onto the cardboard. Now, lightly scribe the two outside flanges where the pattern forms a "v" on one side and an "a" on the other side made by the mold's outside shape. These will be the keys to line up the next areas to be scribed since there's no concrete to line up the mold with again and the mold shape itself makes it hard the judge the distance from the last stone to the next to keep the mortar thickness the same. Once I can see the rocks I can't help but miss the ass in my face....yummy.
Unfortunately for older glued floating hardwood floors, the multifunction tool does not provide all the accessories to complete a repair. These floors require a groove cleanout so they can effectively fit together again. Otherwise re-attachment is not possible without the final outcome looking like a repair. They simply will not engage and you're left with a repair board that will not fit back into place. Attempting to clean the glue with hand tools may work, but will take longer and is likely to cause damage to the surface of the board itself.
The first step to preparing for a shipment is selecting a handling unit that allows for your item(s) to be transported efficiently and safely. A handling unit is considered a forklift-ready preparation of the item to be shipped with. Oftentimes, the slot where forklifts and pallet jacks are inserted under the freight is called "cribbing". In a lot of cases, however, large items to be loaded on a flatbed truck can just be hoisted on to the truck with a forklift or other loading equipment and moved as a piece and strapped to the platform appropriately (and possibly even covered with tarps for weather protection). Sometimes, ramps may even be available to drive or move vehicles or equipment on to the truck bed. In general cases when you need to palletize the shipment, standard pallets most commonly suffice to accommodate the handling of the items, but the following is an extensive list of the types of shipping handling units:
I am not sure what scale architectural models are build to, but 1:200 does not equate to inches very well. 1/48th works out to 1/4-inch equals 1 foot, and 1/72 equal 1/6 to one foot. The scale should be divisible by 12 (i.e. 1/144th scale would be 144 divided by 12 which gives 1/12 of an inch equals one foot). You could always go with 1/192 (1/16 of an inch equals one foot), which is a popular scale for ship models. Another choice would be use metric where 1/200th would work fine.
Now that the multifunction tool has come down in price, we can now consider this job as being doable. Harbor Freight has one selling for about sixty dollars while the home improvement stores have other names at higher prices. The product is much safer to use, and has more precision control compared to the circular saw. In addition, multiple attachments can handle the work that required a few hand tools to finish the job.
I noticed that the board that's mounted to the hand-cranked lead screw that makes the work surface boards function as a built-in vise, was loose, and flopped around as the handles were cranked. To remedy this, I used a wrench to tighten the crank shaft attachment on the moveable work surface so that there was less play as the unit is cranked. Don't over tighten, or the board won't move at all!