Juana Golden Harbor Freight January 04th, 2020 - 01:15:20
While I have seen some hand painted models it is a skill I have never been able to develop. Most really bang up jobs are done with airbrush. For that I would recommend a Paasche model "H". It is good, durable airbrush that is packaged with three different tips. It is cheaper than an Iwata, though some Hobby Lobby stores carry both and you can usually score one during Hobby Lobby's 40% of sales.
You will want the barrel to be black in order to absorb heat. I used Krylon's Fusion because the barrel I located was blue plastic. I figured Fusion would adhere better, but, truth to tell, any enamel should work as well. I used brush-on green enamel for the platform, but since I used treated wood, even this step is not essential. If you can find a black barrel and don't mind an unpainted platform, knock off $11.75.
You do not have to have a compressor, some people prefer to use a CO2 bottle, but that seems somewhat expensive. Some of the discount tool companies (like Harbor Freight) stock inexpensive compressors. Probably the most import thing to a good finish is good surface preparation. In other words a good clean. Smooth surface. As I have gotten older I have developed a tendency to prime the surface and after that dries well to sand it with very fine grit paper. Try 3200, 2500, in that range.
Wind generators can be tower mounted or mounted to the roof of a building, as a house, shed or barn. Using a tower mount is the most expensive but puts less wear and tear on a roof. Probably, depending on the type, the roof wear would not amount to the several thousand dollars extra invested in a tower. Also location of the buildings, wind speed and trees, etc will help determine where to place the generator. A wind speed test will need to be preformed before the exact location is found.
Everything comes down to marketing. You are married because you market to your mate enough to be married. Your kids don't hate you because you market to them just enough that they don't hate you. The big Secret is to learn marketing, and you can plug in what ever you like, and it will succeed. Towing a trailer with signs behind your bike is different enough that it will get noticed!
Table saw: 10 inch cabinet saw, not one of those little saws that set on a table top, Again find a second hand saw, 2 to 5 horse power and a simple fence is all you need. so long as the blade can be squared up and the fence can be adjusted true. rust can be overlooked, and belts can be replaced. One thing here to spend money on is the blade, carbide tipped 50 to 60 tooth spend $50.00 to $70.00. you will want two $50.00 blades not one $100.00 blade. One blade is either at the saw sharpener or ready to go the sharpener. point is a sharp lower cost blade is a lot better than dull $150.00 blade.