Gladys Figueroa Harbor Freight December 11th, 2019 - 02:30:56
Let's start with what I think is about the most important thing "protect that attitude". I know that isn't where most people start however without it cleaning that scoot will always be a headache. How do I protect it? First, get a motorcycle lift. They're not all that expensive these days. I got mine at Harbor Freight for about $300.00 and I can't tell you how much easier it is to clean any bike. You can get them much cheaper even as little as $60.00 or so. But my point is to get that baby up in the air so you don't have to hurt your knees, back or anything else. Nobody looks forward to kneeling or bending over for hours at a time. Do you think that might be a reason your friend's bikes may not be so clean?
In no time at all you'll have each stones outline down to a rhythm. Most all the stones can be completed in two independent outline strokes and one more stroke to fill. Try to have an adult go first, stenciling ahead of any children. We know how eager they can be sometimes. Once the mortar coat is dry to the touch, you can stack all the sheets into one pile. Try to complete one sheet at a time. Stencil all of it then paint all the stones as well. Trying to complete a dozen at once is way too overwhelming of a task, believe you me. The stack is way soft now and everyone shouldn't mind painting for a little bit. No need to have perfectly painted stones because "The Powers That Be" didn't waste His/Her/Their time making them identical so neither should you.
I like creating with my hands. I especially enjoy creating useful items out of wood. Unfortunately, my self-designed and self-built garage 6 X 3 foot workbench has a tendency to become littered with miscellaneous "stuff", and I find myself at my wit's end attempting to build projects on a piece of plywood strung across two folding sawhorses. Not ideal, I will agree. I do appreciate the convenience of being able to take down and put away the components of my makeshift working surface. What I don't like is that the working surface is not that stable and requires a separate set of clamps to hold the working top to the sawhorses.
These units are simple in design as they consist of a 12 volt gel cell battery plus a couple of heavy duty 400 amp cables and rubber insulated clamps. These are extremely useful items as the batteries they have are powerful enough with its 400 amps to actually jump start a vehicle when its starting battery is totally dead. Its peek power rating is approximately 900 Amps. There is AC adapter which comes with it for charging the boost battery as well as a 12 volt cord for charging it from your car as you drive.
When it comes to Northern Tools vs Harbor Freight, the only real comparison we need to be concerned about would be those having to do with issues of quality, selection, pricing, and level of customer service you get. After all, if you are going to be spending a lot of money of tools you want to be sure you get questions answered assuming you have them. You also want to be sure that you are getting the best. I checked into a forum that discusses such topics to see what people were saying about the two companies.
One plastic 50 gallon barrel. I located three on Craigslist and paid $24 for all three, so $8. Four three inch rigid-caster wheels. Harbor Freight has them for $3 each, so $12 for these. Treated wood, although I used 2X6's, treated deck wood would work just as well,$20. Paint for the barrel, $4.25. Paint for the platform,$7.50. Lag bolts and washers to mount the rigid casters $4.80. Two 2" PVC vent pipes cut from a ten foot length of pipe, $5. Four NIBCO 1 1/2 In. PVC DWV Trap Adapter Spigot x Slip Joints,$8. Window hardware: 8"continuous hinge and three cabinet latches, $9. The total is $78.55. Of course any of these materials you happen to have on hand will decrease your cost: